Power from SCE
Electrician in Glendora: emailed worksheet permits on SCE
Glendora sends electrical permits through an emailed worksheet to the Building Division, runs on SCE, and sits against the San Gabriel foothills where the 2014 Colby Fire started.


Permit fees in Glendora
City of Glendora Building Division
| Item | Fee |
|---|---|
| Electrical permit issuance fee (per permit) Item Elec-14. Master Schedule of Fees for Service, FY 2027, adopted by council on August 25, 2026 and posted by the city under Budget & Reports. | $52.00 |
| Electrical service 0-600V, not over 225 amp (panel upgrade) Item Elec-6, each. Over 225 amp is $149. Issuance fee is listed separately. Master Schedule of Fees for Service, FY 2027, adopted by council on August 25, 2026 and posted by the city under Budget & Reports. | $118.00 |
| EV charging station electrical permit Item Elec-15, each. Issuance fee is listed separately. Master Schedule of Fees for Service, FY 2027, adopted by council on August 25, 2026 and posted by the city under Budget & Reports. | $391.00 |
| Electrical minimum permit fee Item Elec-13, each. Master Schedule of Fees for Service, FY 2027, adopted by council on August 25, 2026 and posted by the city under Budget & Reports. | $118.00 |
| Mechanical, electrical or plumbing plan check Item BP-7, charged by the hour when plan check applies. Master Schedule of Fees for Service, FY 2027, adopted by council on August 25, 2026 and posted by the city under Budget & Reports. | $215.00 per hour |
Taken from the city's fee page. Fees change, and other charges such as plan check can apply. Confirm at the permit counter. Compare permit fees across cities.
EV charger permits. California AB 1236 requires an expedited process. The city's electronic workflow uses the Building Plan Check/Permit Worksheet.
Inspections. Counter and phone hours are Monday to Friday, 8:00 a.m. to 5:00 p.m.
Rebates listed for Glendora
From SCE and the city
| Program | Amount |
|---|---|
![]() SCE Charge Ready Home (run by Center for Sustainable Energy) SCE customers in disadvantaged communities or income-qualifying single-family households; address eligibility varies | Up to $4,200 for a 200 A panel upgrade plus a dedicated 240 V circuit for Level 2 charging |
Amounts as listed by each program, October 2026. Programs have limits and rules.
$2,500 to $4,500
A regional range from the sources on the cost page. Your electrician gives the actual quote after a look.
Get this quote
Panels from the 1960s
Four in five Glendora homes were built before 1980, 65 percent before 1970 and 41 percent before 1960. Seventy-nine percent of homes are single-family and 68 percent are owner-occupied, which fits the common story here: an original panel, air conditioning added later, and now an EV or heat pump on top. Start with the panel upgrade page and, for houses from the late 1960s and early 1970s, aluminum wiring risks, since aluminum branch wiring was used from about 1965 to the mid 1970s.
The email workflow
The Building Division at 116 E. Foothill Blvd. is open Monday to Friday, 8:00 a.m. to 5:00 p.m. You download the worksheet, email it, then pay and upload documents electronically. The city’s adopted FY 2027 fee schedule lists a $52 issuance fee, $118 for a service up to 225 amps and $391 for an EV charging station permit, with plan check charged by the hour when it applies. Ask for the total before budgeting, and ask how long plan check takes. The permit guide shows how other cities handle the same steps, and the panel cost page gives typical ranges.
Fire, wind and outages
The Colby Fire began in January 2014 on the Colby Truck Trail above the city, forced evacuations in Glendora and Azusa and destroyed five homes. The shutoff block on this page has the rest of the history. What it means for a homeowner is that foothill streets should have a plan before wind season. Ask the city whether your parcel sits in a fire hazard zone, then read wildfire zones and electrical work, the PSPS prep checklist and generator versus battery backup. A generator inlet box is the low-cost option.
Programs
If your household is income-qualified or in a disadvantaged community, SCE’s Charge Ready Home program may apply; its terms change, so read the Charge Ready Home guide first. Glendora belongs to the San Gabriel Valley Council of Governments, which runs the eSGV program with a free whole-house efficiency assessment. It does not cover solar, batteries or chargers.
Questions to settle first
Before the first visit, find out the main breaker size and whether the panel has room. Ask the electrician whether the service and meter socket are in good shape. SCE does its own part after the city clears the work, and the city’s review time comes first, so plan for weeks. The utility coordination guide explains who does what, and the load calculation guide shows how panel size is decided. Nearby cities with different counters are Claremont and West Covina.
Glendora homes: age, count and heating
U.S. Census Bureau, American Community Survey; QuickFacts for Glendora. Climate zone 9.
Getting power work done with SCE
SCE sets and reconnects the meter. Its published targets cover only SCE steps, and city review time is extra. How the steps fit together.
Glendora is served by SCE: the City of Glendora relayed SCE's PSPS notice to residents in May 2020 and Glendora City News carried SCE scheduled-outage notices. Glendora does not appear on the CSE SCE territory list excerpt checked. Confirm the service territory for the specific address (the neighboring city of Azusa has its own municipal utility, Azusa Light and Power). Not in Clean Power Alliance's July 2025 member list.

Backup power for shutoff days
Fire weather and power shutoffs
Shutoff record: None on record
The Colby Fire began January 16, 2014 on the Colby Truck Trail above Glendora and burned about 1,950 acres, forcing evacuations in Glendora and Azusa (about 2,000 people reported) and destroying 5 residences. In a May 12, 2020 notice the city relayed SCE's statement that when wildfire risk is high SCE may declare a Public Safety Power Shutoff. In March 2015 the city alerted residents to scheduled SCE upgrade outages (for example 33 customers on Fountain Springs Lane north of Boulder).
Local details
Jobs homeowners here ask about
Near Glendora
Questions about electrical work in Glendora
Do I email my electrical permit worksheet to Glendora instead of using a portal?
Yes. The city's electronic workflow starts with the Building Plan Check/Permit Worksheet, which is emailed to the Building Division. You then pay and upload files electronically, and permits and plan check comments come back by email. The city also verifies the contractor's license or owner-builder status. Call (626) 914-8222 with questions.
Will SCE shut off my power during a fire watch in Glendora?
It might. In a May 12, 2020 notice, the city relayed SCE's statement that SCE may declare a Public Safety Power Shutoff for a neighborhood when wildfire risk is high. Sign up for SCE outage alerts and plan for foothill wind days, which fall mostly in the fall. Hillside homes should decide on backup power before a warning arrives.
Do I need a backup battery or generator inlet in the Glendora foothills?
It is a choice, not a rule. The Colby Fire in 2014 and the SCE shutoff notice show why hillside homes think about outages. A battery runs quietly and starts by itself. A generator inlet and interlock costs less and needs fuel. Your electrician can size either for the loads you pick.
Is Glendora served by Edison or by a city utility?
Edison, based on the city's own notices of SCE outages and shutoff warnings. Neighboring Azusa has its own municipal utility, so an address near that line is worth confirming on your bill. Glendora is not in Clean Power Alliance, so the bill comes from SCE for both generation and delivery.
How do I get a Level 2 charger approved in Glendora?
Expect the standard worksheet path. State law, AB 1236, requires every city to run an expedited review of charger permits. Email the Building Plan Check/Permit Worksheet and ask the Building Division what it wants attached, such as a load calculation and a single-line diagram. Ask the counter for a timeline before you book the electrician.
Send a photo, get a range.
Share your ZIP and a photo of your panel. Your request goes to a licensed partner electrician, who contacts you.
Get this quoteAurion Electric is a referral service operated by Roviq LLC. Electrical work is done by a licensed partner electrician.

