Mass Save heat pump rebate in Beverly
National Grid serves Beverly. Install in 2026 and Mass Save pays $2,650 per ton. From January 1, 2027 it pays $2,350.
- Checked: November 2026
- Mass Save rate drops: Jan 1
The short answer for Beverly. If you are replacing oil, propane or electric baseboard, apply with your electric account (National Grid). If you are replacing natural gas, apply with your gas account (National Grid). The rebate is the same either way: $2,650 per ton up to $8,500 for 2026 installs, then $2,350 per ton up to $7,500 from January 1, 2027.
Beverly estimator
What could a Beverly home get back?
Your estimate
Up to $8,500
Finished in 2026: $2,650 for each ton, up to $8,500.
What to do next
Rates: Mass Save, read November 6, 2026. An estimate, not an offer. Mass Save decides who qualifies and pays the rebate.
What Mass Save pays in Beverly: 2026 against 2027
| System | Installed 2026 | From Jan 1, 2027 | Change |
|---|---|---|---|
| 2-ton whole-home | $5,300 | $4,700 | -$600 |
| 3-ton whole-home | $7,950 | $7,050 | -$900 |
| 3.2+ ton whole-home (cap) | $8,500 | $7,500 | -$1,000 |
| 2-ton partial-home | $2,250 | $2,000 | -$250 |
| 3-ton partial-home | $3,375 | $3,000 | -$375 |
Which account do you apply with in Beverly?
| Your heat today | Apply with | Beverly homes (Census) |
|---|---|---|
| Oil, propane or electric resistance | Your electric account (National Grid, a Mass Save electric sponsor) | 8,179 homes (48%): 4,284 oil, 3,454 electric, 441 propane |
| Natural gas | Your gas account: National Grid. Mass Save's gas sponsor rule. | 8,538 homes (50%) |
What qualifies a Beverly home
The median home in Beverly was built in 1956, well before Mass Save's 2000 cut-off. Most whole-home projects here will need the other weatherization test: a Home Energy Assessment recommending under $1,000 of work, or 2013-or-later recommendations completed. 60% of Beverly homes are owner-occupied.
- Installer. Mass Save requires a contractor in its Heat Pump Installer Network.
- Whole-home weatherization test (Mass Save): built in 2000 or later, or a Home Energy Assessment recommending under $1,000, or 2013-or-later recommendations completed.
- Full-time winter home and one whole-home rebate per account.
Permits in Beverly
Municipal Inspections (Building Department)
- Address
- 8 Dane Street, Beverly, MA 01915
- Phone
- 978-921-6025
- Hours
- Mon to Wed 7 am to 3 pm, Thu 7 am to 6 pm, Fri 7 to 11:30 am
Beverly permit pageOnline permits
Beverly issues permits for all building, electrical, plumbing, gas and mechanical work, and no longer accepts paper applications: online only.
Beverly's electrical fee is $25 per $1,000 of estimated electrical cost, $65 minimum. Sheet metal is $15 per $1,000, $65 minimum.
The December 31 timeline for Beverly
- 1NowGet proposalsTwo or three installers in the Mass Save network. Ask each for a firm install date.
- 2By Dec 31, 2026Heat pump installedThe install date sets the rate. $2,650 per ton, up to $8,500 (whole-home).
- 3Jan 1, 2027New rate startsInstalls on or after this date: $2,350 per ton, up to $7,500 (whole-home).
- 4By Feb 28, 2027Rebate form inForm and paperwork for 2026 installs must reach Mass Save. Allow about eight weeks.
The full dates for every program: the December 31 deadline guide.
Questions about heat pump rebates in Beverly
Does Beverly get Mass Save heat pump rebates?
Yes. Electricity and gas in Beverly both come from National Grid, a Mass Save sponsor. Use your electric account if you are replacing oil, propane or electric resistance heat, and your gas account if you are replacing natural gas.
How much is the Mass Save heat pump rebate in Beverly in 2026?
A whole-home heat pump installed in 2026 gets $2,650 per ton, up to $8,500. A 3-ton system pays $7,950 and anything from about 3.2 tons up pays the $8,500 cap. Partial-home pays $1,125 per ton, up to $8,500.
What is the 2026 deadline for a heat pump in Beverly?
The heat pump has to be installed by December 31, 2026 to get $2,650 per ton. Mass Save must receive the rebate form and paperwork by February 28, 2027. Installs on or after January 1, 2027 get $2,350 per ton, capped at $7,500.
Do I need a permit for a heat pump in Beverly?
Beverly's Municipal Inspections (Building Department) handles permits. Beverly issues permits for all building, electrical, plumbing, gas and mechanical work, and no longer accepts paper applications: online only. Call 978-921-6025 or see the town's permit page before work starts. The licensed contractor doing the work normally pulls the permit.
Is it worth installing a heat pump in Beverly before December 31?
For a whole-home system, installing in 2026 pays up to $1,000 more than installing in 2027 ($8,500 against $7,500 at the caps). The install date decides the rate, so ask your installer for a committed date in writing.
Who can install a heat pump in Beverly and still get the rebate?
Mass Save pays only when the system is installed by a contractor in its Heat Pump Installer Network, so check any contractor against that list before you sign. Aurion takes heat pump projects in Beverly and helps with the rebate paperwork. Licensed work is done by licensed Massachusetts technicians. Send two photos and the town to get a price.
More for Beverly
Average cost context from Mass Save: $22,000 for a whole-home install finished in 2022, which leaves $13,500 after the 2026 cap. Your quote decides the real number. Questions? Call (781) 210-8400.
Heat pump in Beverly? Decide before the rate drops.
Send two photos and your town. We look at them and get back to you with a price. Or call (781) 210-8400.
Send photos, get a price